Auto Couture Supreme 3pc (not the BR's) aggressive sizing

[widebody_Q]

I am selling my Auto Couture Supreme 3pc. wheels. These are not the much cheaper 2pc BR's that most people have. The BR's only go up to 10" widths and they have a different center cap.

Please understand that these wheels will need some TLC. I would recomend a full refinish. I will have pictures up later today of each wheel. Two of the inner barrels are beat up. They will need to be repaired. I have taken all of this into consideration in the pricing. Understand that these go for over $1300 for each wheel in new condition without counting shipping and handling.

The faces and lips are diamond cut silver polished. The edges of the lips are rolled and not flat like most wheels.

Sizes
19x11.5 negative -14 Hi Disk
19x12 negative -8 Hi Disk

If the sizes are too aggressive, you can have the disks cut and refilled. The wheel disks are massive. They are about 2" on each wheel.

$1100 + Shipping
http://i5.photobucket.com/albums/y170/aedprix/IMG_0224.jpg

[VipDout]

I thought someone bought these from norcal ? hmmm

[widebody_Q]

Maybe but not mine. They are sitting in the garage along with alot of other stuff that needs to be moved out asap

[hondaboi]

wondering if you have actual pictures of the wheels??

[widebody_Q]

Its 3am here. I will have actual pics of each wheel tomorrow when the sun is out.

[20sburning]

wondering if you have actual pictures of the wheels??
those are the actual wheels in the pic... and that is his actual car... thats just what it used to look like.... good luck with the sell Agi

[airmax]

:( damn that 11.5 front.

[volkgt7]

never considered the fact that that u might sell these! goodluck!

[Caoboy]

I thought someone bought these from norcal ? hmmm
SOMEBODY bought 18's, not 19's.

[widebody_Q]

Sorry no pics today. I been busy all day. I managed to clean the two front wheels. I'll wait until I clean the rears tomorrow before I take any pics.

These rims are project wheels. If you plan to just slap them on your car, it's not happening. You need to make these wheels fit your car. Also, you need to fix the inner barrels or even replace them. That is the only reason they are priced so cheap. The price is not set in stone but please don't low ball me or I will ban you. JK =)

[DIRTYATL]

GLWS man

[LiCelsior]

hmmmmmmmmmmmmmmmmmmmmm

[airmax]

hey agi hit me up on aim plz.

[Rodneyc77]

Hey Agi... Good Luck with the sale... You think I can make them fit my TL... :slap: :smiley-rofl:

Anyway... Good luck with the sale... those wheels are just dope... will compliment any build...

[SIMPLE G50]

Sorry no pics today. I been busy all day. I managed to clean the two front wheels. I'll wait until I clean the rears tomorrow before I take any pics.

These rims are project wheels. If you plan to just slap them on your car, it's not happening. You need to make these wheels fit your car. Also, you need to fix the inner barrels or even replace them. That is the only reason they are priced so cheap. The price is not set in stone but please don't low ball me or I will ban you. JK =)

Can you the some pics of the inner barrel also when you get a chance. Also are the inner barrel rashed up or bent?

[widebody_Q]

Don't mean to tease but pics will be up later tonight. I am busy helping a friend get his tires mounted.

[widebody_Q]

Sorry for the delay. I have been busy all day and night

http://i5.photobucket.com/albums/y170/aedprix/wheels/9.jpg
http://i5.photobucket.com/albums/y170/aedprix/wheels/8.jpg
http://i5.photobucket.com/albums/y170/aedprix/wheels/12.jpg
http://i5.photobucket.com/albums/y170/aedprix/wheels/11.jpg

http://i5.photobucket.com/albums/y170/aedprix/wheels/1.jpg
http://i5.photobucket.com/albums/y170/aedprix/wheels/2.jpg
http://i5.photobucket.com/albums/y170/aedprix/wheels/4.jpg
http://i5.photobucket.com/albums/y170/aedprix/wheels/3.jpg
http://i5.photobucket.com/albums/y170/aedprix/wheels/6.jpg
http://i5.photobucket.com/albums/y170/aedprix/wheels/7.jpg

[OG]

thats it? you made it sound serious.

[BIG TY]

Those wheels looks sick and i spoke to my local rim guy and he can fix it. you have pm and i have have cash in hand, let me know asap.Thanks

[Smitty]

Wow. I cant believe you're selling these. Real good price. Good luck bro.



-Smitty

[widebody_Q]

Thanks guys. I currently have an interested buyer but I will keep you all posted.

Sale pending

[oohpapi44]

Hey what's up Agi, my brother is seriously interested in making these fit his project. If that sale falls through, let me know asap.

[widebody_Q]

Thanks guys. These are just about sold. I am locking the thread

[widebody_Q]

The thread is open again

I am including two tires with the deal. Both tires have over 97% tread on them. Verderstien 275/30/19. Thats my new favorite tire due to the tread pattern. One of the tires does have deep rubbing marks on the actual thread because the car had to be pulled onto a tow truck after an elecrtical line got torn off.

http://i5.photobucket.com/albums/y170/aedprix/wheels/125_3185.jpg

http://i5.photobucket.com/albums/y170/aedprix/wheels/125_3186.jpg

http://i5.photobucket.com/albums/y170/aedprix/wheels/11.jpg
http://i5.photobucket.com/albums/y170/aedprix/wheels/12.jpg
http://i5.photobucket.com/albums/y170/aedprix/wheels/125_3196.jpg
http://i5.photobucket.com/albums/y170/aedprix/wheels/125_3195.jpg
http://i5.photobucket.com/albums/y170/aedprix/wheels/125_3194.jpg
http://i5.photobucket.com/albums/y170/aedprix/wheels/125_3193.jpg
http://i5.photobucket.com/albums/y170/aedprix/wheels/125_3192.jpg
http://i5.photobucket.com/albums/y170/aedprix/wheels/125_3191.jpg

[widebody_Q]

All imperfections are being shown

http://i5.photobucket.com/albums/y170/aedprix/wheels/125_3190.jpg
http://i5.photobucket.com/albums/y170/aedprix/wheels/125_3187.jpg
http://i5.photobucket.com/albums/y170/aedprix/wheels/125_3180.jpg
http://i5.photobucket.com/albums/y170/aedprix/wheels/125_3178.jpg
http://i5.photobucket.com/albums/y170/aedprix/wheels/125_3177.jpg
(look at that tire. Yum)
http://i5.photobucket.com/albums/y170/aedprix/wheels/125_3176.jpg
http://i5.photobucket.com/albums/y170/aedprix/wheels/125_3179.jpg
can be banged out. As you can see, the tire is still holding air. I drove on that wheel for a month before I realized that the inner barrel was bent

[optionii]

how much would be shipping to cali? Do you have any idea how much would cost for the repair? thanks

[optionii]

repost, sorry

[widebody_Q]

I'm letting them go for $1300 shipped anywhere. Shipping alone is anywhere from $200-$300 plus I'm including two tires so I can't go lower then that on the price.

Repair costs varies from place to place. It also depends on if you want a show setup or you just want them to look decent.

[MELOMEL]

Damn agi these would look great on my car to bad i dont got all the $ rite now I was gonna ask if youll sell em to me a few months ago but didnt think youll give em up

[optionii]

thanks I will let you know, I am gonna find out how much would cost to repair them.

[SIMPLE G50]

If the sizes are too aggressive, you can have the disks cut and refilled. The wheel disks are massive. They are about 2" on each wheel.



If you cut down the disk to the max what will be the wheel specs when done?

I've seen your post way back when you had these wheels but they were 19x10.5 -14 / 19x11 -9... any relation?

[widebody_Q]

When I bought the wheels, thats what I was told the specs were. That was off. I realized when my tire stretches looked so much more extreme then anyone else using the same tires on the same widths. The spec sticker is still on there and if you take a pencil, you can see the real specs which are 19x11.5 -14, 19x12 -8

The disks are about 48mm all around. You would need to talk to a wheel shop to find out what would be safe and what wouldn't be. I would say you can cut about 25-30 up front and 40 in the rear. Don't hold me on that though. I believe rbmotoring offers this service so give them a call if you are serious. That would bring all the wheels into the positives in offsets.

[steeb]

pm'd

[OneSODA]

Pm me your info. I'll take them.

[widebody_Q]

Sale pending.

[junjdm]

damn those are sick! and a good price

[OneSODA]

are they sold, if not let me know

[steeb]

^^ im pretty sure they are sold

[widebody_Q]

LOL yes he's right. They are sold. Thank you.