4 Lug VIP wheels

[cleanbb]

I've seen a lot of VIP wheels and I want to know besides WORK and JLINES (Which some say aren't great) what brand has clean 4 x 100 wheel for a scion. I like HRE but didn't see any 4 lug wheels. websites anyone.

[JN.FYC]

get the Work Fs.
Those are hella sick.

[cleanbb]

I thought about that but I was looking for something a little less common than work wheels.

[JN.FYC]

4 lugs hommie

http://adaptivestrategies.com/LexSynergy.jpg


Jk, Yo :P

[TLontheDL]

4 lug deep dish is a little hard to find.* ive searched* :'( heck, even decent looking 4 lugs are hard to find.

[cleanbb]

Okay so I am not the only one seeing this problem in availability.

If I could I want these fro HRE

http://www.hrewheels.com/images/wheels/943R_lrg_a.jpg

[NG C-Klasse]

Wed's Kranze Cerberus (but only 15"):
http://www.weds.co.jp/images/products/kranze/cerberus-k2_sbc_b.jpg

[firelizard]

Work has 4x100 available, so does Fabulous.
A tip: if it has exposed lugs it's less likely to have different bolt patterns, and if it's a 5 spoke pattern with the lugs between the spokes, you have no chance of getting a 4 lug pattern drilled. Your best bet is to look at wheels that have a center cap covering the lugs because usually they are made to be custom/redrilled or available in several patterns and pitches

[cleanbb]

Work has 4x100 available, so does Fabulous.
A tip: if it has exposed lugs it's less likely to have different bolt patterns, and if it's a 5 spoke pattern with the lugs between the spokes, you have no chance of getting a 4 lug pattern drilled. Your best bet is to look at wheels that have a center cap covering the lugs because usually they are made to be custom/redrilled or available in several patterns and pitches


Thans for the advice much appreciated ;)

wish you could get them bigger than 15's I am digging these though

http://www.weds.co.jp/images/products/kranze/lxz15_smb_b.jpg

who sells wed's in the USA

[firelizard]

TireRack sells Weds. Right now they only have some Wedsports and the Weds Bavaria though =(

Dear Overseas dealers and customers,

We are afraid we do not deal with you directly.
If you like to buy our products, we would be pleased to introduce our official agents to you.
So if you wish to contact them, please fill the items below up and send it to us. export@weds.co.jp
(Please do not change the subject.We would like to distinguish your E-mail from spam mails.
If you changed the subject,we delete it without reading.)

・Country name:
・Address:
・Contact name:
・Telephone number:
・FAX number:
・E-mail address:
・What is your business? (Ex. Shop, Wholesale, Internet shop):

Weds Co.,LTD. Export Section
TEL: +81-3-5753-8238 / FAX: +81-3-5753-8258

[JUSDER99]

I have Weds Kranze Cerberus 18's I might sell... forgot the offsett but they're deep 10.5 r and 8.5 f.... pm me if yer interested

[ScottyTuned]

Have you checked out the SSR Vienna Dishes? Im a fan of those. Granted they look like the DHs everyone has, but they still look good, and you can get a true 3 piece wheel. Theres also a couple others in the Vienna series you can pick up in 4x100

[signalxb]

check out yahoo auctions japan. you just might get lucky ;)

[firelizard]

In fact, if you search for "bb" you'll get lots of xB friendly results