Blitz
04-21-2009, 01:45 AM
All used and located in south Orange County. I don't want to ship but will ship on your dime.
Sony DVD/CD/FM/AM player with built in 5.1 sound system. 5 satellite speakers and 1 subwoofer. Have all speaker wires. No remote. Perfect for a little garage music setup or you can still use it to watch movies etc. Does not play burned DVDs..only legit ones. S-video/RCA only maybe coaxial....does NOT have hdmi/dvi.
$25 picked up
http://i285.photobucket.com/albums/ll56/tony42378/For%20Sale/P1010880.jpg
http://i285.photobucket.com/albums/ll56/tony42378/For%20Sale/P1010879.jpg
http://i285.photobucket.com/albums/ll56/tony42378/For%20Sale/P1010878.jpg
http://i285.photobucket.com/albums/ll56/tony42378/For%20Sale/P1010877.jpg
Sony VHS player. No box. Not old school but maybe around 3 years old. No remote. RCA/Coaxial output only and most likely S-video also.
$15 picked up
DirectTV H20 Receiver with remote. Has RCA/coaxial/S-video/HDMI output 2-3 years old. Has card but not sure if you can use it. Might be a newer one out these days.
$20 picked up
http://i285.photobucket.com/albums/ll56/tony42378/For%20Sale/P1010881.jpg
Used Rockford Fosgate amp Punch 250a2. it works and it powered my 10" sub beautifully.
$20
http://i285.photobucket.com/albums/ll56/tony42378/For%20Sale/P1010498.jpg
Used Alpine amp and these powered all 4 of my interior speakers wonderfully.
$30
Model MRV-F340
Give your audio system a healthy dose of power with Alpine's MRV-F340 multi-channel (55 watts RMS x 4) amplifier.
The unstoppable power of this Alpine V12 Series amp comes from the massive transformers and fast MOSFET power supplies. Extra-large capacitors deliver additional current when needed to fuel musical peaks. The amps are built using Alpine's STAR Topology design to greatly reduce internal noise, keeping the signal clean so that your speakers can perform better.
The internal Bass Engine® provides a subsonic filter and built-in crossovers for trimming frequencies for maximum efficiency. The top-mounted controls are conveniently hidden and protected by a flip-up top cover. Likewise, your cables are concealed under the front cover, which can be removed to save space.
Details:
55 watts RMS x 4 at 4 ohms
65 watts RMS x 4 at 2 ohms
130 watts RMS x 2 in bridged mode
2-, 3-, or 4-channel output
Tri-way capable (Tri-Way crossover required)
requires 10-gauge power and ground leads — wiring and hardware not included with amplifier
Bass Engine® features:
variable 30-400 Hz high-pass/low-pass crossovers, 12 dB/octave
rear channels have a subsonic filter at 15 Hz
MOSFET power supply
STAR Topology (minimizes internal noise and prevents ground interference)
speaker- and preamp-level inputs
preamp outputs
oversized power and ground connections
gold-plated screw terminals
top mounted controls with cover
detachable front cover
blue power LED
10-3/8"W x 2-1/2"H x 12-3/8"D
http://i285.photobucket.com/albums/ll56/tony42378/For%20Sale/P1010499.jpg
http://i285.photobucket.com/albums/ll56/tony42378/For%20Sale/P1010500.jpg
Another used Alpine amp 4 channel that was used in my truck. Abit newer model then the one above.
$40
Model MRP-F250
4-channel car amplifier
40 watts RMS x 4 at 4 ohms (50 watts RMS x 4 at 2 ohms)
100 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode)
2-, 3-, or 4-channel output
variable high-pass/low-pass filters (50-400 Hz, 12 dB/octave)
tuned Bass EQ (12 dB bass boost at 50 Hz for channels 3 & 4)
subsonic filter (15 Hz, channels 3 & 4 only)
MOSFET power supply
CEA-2006 compliant
STAR Topology (minimizes internal noise and prevents ground interference)
speaker- and preamp-level inputs
preamp outputs
gold-plated screw terminals
fuse rating: 15A x 2
8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
11-1/4"W x 2-3/8"H x 9-9/16"D
http://i285.photobucket.com/albums/ll56/tony42378/For%20Sale/P1010501.jpg
Brand new Orion 10" sub. P10D4
$60
Features of the Orion P10D4 include:
Heavy gauge rolled steel Orion-designed basket with dual stack magnet assembly
High-rigidity paper cone and medium roll NBR surround
Small sealed box performance
500 watts continuous/1000 watts peak
2-1/2" voice coil on aluminum former and vented pole piece
Custom-tooled wrap gasket and protective magnet boot
Satin-finish heavy gauge wire terminals
Frequency range (Hz) 40-2.5k
Energy Bandwidth Product (EBP) 62.23
Dimension: 9.45 x 5.25 x 10.45
http://i285.photobucket.com/albums/ll56/tony42378/For%20Sale/P1010502.jpg
Sony DVD/CD/FM/AM player with built in 5.1 sound system. 5 satellite speakers and 1 subwoofer. Have all speaker wires. No remote. Perfect for a little garage music setup or you can still use it to watch movies etc. Does not play burned DVDs..only legit ones. S-video/RCA only maybe coaxial....does NOT have hdmi/dvi.
$25 picked up
http://i285.photobucket.com/albums/ll56/tony42378/For%20Sale/P1010880.jpg
http://i285.photobucket.com/albums/ll56/tony42378/For%20Sale/P1010879.jpg
http://i285.photobucket.com/albums/ll56/tony42378/For%20Sale/P1010878.jpg
http://i285.photobucket.com/albums/ll56/tony42378/For%20Sale/P1010877.jpg
Sony VHS player. No box. Not old school but maybe around 3 years old. No remote. RCA/Coaxial output only and most likely S-video also.
$15 picked up
DirectTV H20 Receiver with remote. Has RCA/coaxial/S-video/HDMI output 2-3 years old. Has card but not sure if you can use it. Might be a newer one out these days.
$20 picked up
http://i285.photobucket.com/albums/ll56/tony42378/For%20Sale/P1010881.jpg
Used Rockford Fosgate amp Punch 250a2. it works and it powered my 10" sub beautifully.
$20
http://i285.photobucket.com/albums/ll56/tony42378/For%20Sale/P1010498.jpg
Used Alpine amp and these powered all 4 of my interior speakers wonderfully.
$30
Model MRV-F340
Give your audio system a healthy dose of power with Alpine's MRV-F340 multi-channel (55 watts RMS x 4) amplifier.
The unstoppable power of this Alpine V12 Series amp comes from the massive transformers and fast MOSFET power supplies. Extra-large capacitors deliver additional current when needed to fuel musical peaks. The amps are built using Alpine's STAR Topology design to greatly reduce internal noise, keeping the signal clean so that your speakers can perform better.
The internal Bass Engine® provides a subsonic filter and built-in crossovers for trimming frequencies for maximum efficiency. The top-mounted controls are conveniently hidden and protected by a flip-up top cover. Likewise, your cables are concealed under the front cover, which can be removed to save space.
Details:
55 watts RMS x 4 at 4 ohms
65 watts RMS x 4 at 2 ohms
130 watts RMS x 2 in bridged mode
2-, 3-, or 4-channel output
Tri-way capable (Tri-Way crossover required)
requires 10-gauge power and ground leads — wiring and hardware not included with amplifier
Bass Engine® features:
variable 30-400 Hz high-pass/low-pass crossovers, 12 dB/octave
rear channels have a subsonic filter at 15 Hz
MOSFET power supply
STAR Topology (minimizes internal noise and prevents ground interference)
speaker- and preamp-level inputs
preamp outputs
oversized power and ground connections
gold-plated screw terminals
top mounted controls with cover
detachable front cover
blue power LED
10-3/8"W x 2-1/2"H x 12-3/8"D
http://i285.photobucket.com/albums/ll56/tony42378/For%20Sale/P1010499.jpg
http://i285.photobucket.com/albums/ll56/tony42378/For%20Sale/P1010500.jpg
Another used Alpine amp 4 channel that was used in my truck. Abit newer model then the one above.
$40
Model MRP-F250
4-channel car amplifier
40 watts RMS x 4 at 4 ohms (50 watts RMS x 4 at 2 ohms)
100 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode)
2-, 3-, or 4-channel output
variable high-pass/low-pass filters (50-400 Hz, 12 dB/octave)
tuned Bass EQ (12 dB bass boost at 50 Hz for channels 3 & 4)
subsonic filter (15 Hz, channels 3 & 4 only)
MOSFET power supply
CEA-2006 compliant
STAR Topology (minimizes internal noise and prevents ground interference)
speaker- and preamp-level inputs
preamp outputs
gold-plated screw terminals
fuse rating: 15A x 2
8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
11-1/4"W x 2-3/8"H x 9-9/16"D
http://i285.photobucket.com/albums/ll56/tony42378/For%20Sale/P1010501.jpg
Brand new Orion 10" sub. P10D4
$60
Features of the Orion P10D4 include:
Heavy gauge rolled steel Orion-designed basket with dual stack magnet assembly
High-rigidity paper cone and medium roll NBR surround
Small sealed box performance
500 watts continuous/1000 watts peak
2-1/2" voice coil on aluminum former and vented pole piece
Custom-tooled wrap gasket and protective magnet boot
Satin-finish heavy gauge wire terminals
Frequency range (Hz) 40-2.5k
Energy Bandwidth Product (EBP) 62.23
Dimension: 9.45 x 5.25 x 10.45
http://i285.photobucket.com/albums/ll56/tony42378/For%20Sale/P1010502.jpg