PDA

View Full Version : 225 35 19 on a 19 x 9 a safe stretch ?


TransformCelsior
09-14-2006, 01:18 PM
what u guys think ?

225 35 19 tire on a 19 x 9 wheel a safe stretch ?

AME_VIP
09-14-2006, 01:53 PM
you will die

j/k I run it 19x9.5 on 225/35/19 daily with no issues

J Stuff
09-14-2006, 05:37 PM
a lot of people seem to be running that here

but im going 235 cause i work in an area with potholes and neworleans evacuees that cannot drive..literally, so i need abit more rubber on the road to handle the bad roads

aristo93
09-15-2006, 08:38 PM
stretch away i had the same size and had no problems whatsoever on my ride... :)

aireck
09-15-2006, 10:13 PM
how about a 215/35 on a 9.5 or a 9??

Herb
09-18-2006, 01:04 PM
how about a 215/35 on a 9.5 or a 9??


Thats what my front tires are on (19x9+6) and they are daily driven.

Herb

PMP-LEX
09-18-2006, 04:14 PM
225 on a 9" is a solid stretch...make sure you stretch a Falken 452...you'll thank me later :)

hellaflush
09-18-2006, 04:16 PM
225 on a 9" is a solid stretch...make sure you stretch a Falken 452...you'll thank me later* :)


definately an excellent tire and made for our style of cars

Dominik
09-18-2006, 04:19 PM
I dont suppose Falken's 451 is as good as the 452 is it? Not sure if we have the 452 here in Australia...

PMP-LEX
09-18-2006, 04:21 PM
From what I've gathered, the Falken 451's are similar to the 452's...the 452's however provide more of a triangular stretch because of the technology in the sidewalls...both are great tires...anyone else want to chime in on this?

BUSTN
09-19-2006, 02:28 PM
i'd like to run a 19x9 0n a 215/35 and a 19x10.5 on a 235/35 falken 452.Would the stretch match?

PMP-LEX
09-19-2006, 03:09 PM
i'd like to run a 19x9 0n a 215/35 and a 19x10.5 on a 235/35 falken 452.Would the stretch match?


I think the stretch will match close enough...the fronts may stretch a little more than the rear though...

BUSTN
09-20-2006, 07:00 AM
I think the stretch will match close enough...the fronts may stretch a little more than the rear though...

what i am looking at is a 9"+24 and a 10.5" +25.I am trying to get everything to fit under the stock fenders of a 2nd gen gs, without any work.All i did was cut the rear tab and remove the front trim.I don't mind pulling a lil' just trying not to get into redoing the fenders.I like the rim a lil further out than the fender too, weird?

antbo
09-20-2006, 01:31 PM
what i am looking at is a 9"+24 and a 10.5" +25.I am trying to get everything to fit under the stock fenders of a 2nd gen gs, without any work.All i did was cut the rear tab and remove the front trim.I don't mind pulling a lil' just trying not to get into redoing the fenders.I like the rim a lil further out than the fender too, weird?

you'll be fine with just that.