07 Accord w/ Honda Access Modulo Lip kit...

[Jiraiya_13]

Sup here is my accord again, got some goodies on it, trying to sell my WORK SC3s, running the stocks for now, just got my Modulo lip kit, and put on my Inspire door handles...
http://i192.photobucket.com/albums/z222/MansuAccord/P1000172.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/P1000174.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/P1000175.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/P1000177.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/P1000178.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/P1000184.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/P1000185.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/P1000186.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/P1000187.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/P1000189.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/P1000191.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/P1000192.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/P1000193.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/P1000197.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/P1000199.jpg

[augdogg]

Not bad, but the wheels are killin it for me, please get the other ones on asap...

[Jiraiya_13]

Not bad, but the wheels are killin it for me, please get the other ones on asap...
LOL, yeah tying to sell the wheels I had on my car, until then running on the stocks...

[4play4dr]

jus put the sc3's back on til u sell em..haha..needs wheels badly! car looks super clean tho

[Jiraiya_13]

jus put the sc3's back on til u sell em..haha..needs wheels badly! car looks super clean tho
I would but, don't want to go through the hassle of taking the m off again, and it may take long for me to sell them, don't want to wear the tires...

[CamryVIP]

the side skirts sit lower than the front or is it the pic?

[Jiraiya_13]

Yeah they do...

[SIMPLE G50]

looking good. i can see the potential of an aggressive rear wheel spec.

[g35couture]

dang are you on bags?

[VipDout]

^ ummm it aint coils ! or springs ! hahaha


lip looks nice but hard to say on the sides ,, lets see it with the wheels ! haha

[Jiraiya_13]

^ ummm it aint coils ! or springs ! hahaha


lip looks nice but hard to say on the sides ,, lets see it with the wheels ! haha

Yeah Air Runner, didn't dump it all the way in the rear though, I got some recent pics of it with the wheels on...will post asap...

[Jiraiya_13]

http://i192.photobucket.com/albums/z222/MansuAccord/Picture027-1.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/Picture035.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/Picture042-1.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/Picture043.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/Picture047.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/Picture051-1.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/Picture053-2.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/P1000213.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/P1000228.jpg

[aftermathacura]

that is one nice looking lip kit for that car. :biggthumpup: such a big improvement it made. not many people fix this car up. im definately liking this one.

[uprising]

not a fan of accords, but yours looks good! i love the stance!

[LudeNsol]

looks crazy i like it alot

[GS300ToM]

dam i havent seen a lip kit on a 4dr for da longest.... its clean tho

[Jiraiya_13]

Sorry bad pics but new set-up tryin to fit on my ride CXs 19x9.5 front and 19x10 rears...
http://i192.photobucket.com/albums/z222/MansuAccord/CXfitmenttest.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/AMECX.jpg

[20sburning]

Nice Update and Upgrade! Very clean with the 9.5's:biggthumpup:

[Jiraiya_13]

currently looks good when dumped but not ride height, still need to adjust camber settings in rear and maybe roll more and slight pull and the fronts need to be rolled and camber adjusted as well...hopefully by March it'll be done, waiting on a friend to help out...

[BAHC]

looks much better with the shallens :Thumbsup:

[chancellor842]

looking good

[SIMPLE G50]

good choose on the CX. what are the offsets?

[REV-01]

nice glenn!

[Jiraiya_13]

Thanks Samson, I need camber kits for the front...and everyone else thanks...
The offsets are: fronts 19x9.5 +25 SLow disk 225/35ZR19 and rear 19x10 +25 SLow disk 235/35ZR19 thinkin of goin 225 in the rear would have fitted better, right now the rear is rubbing against the fender whee its rolled so maybe i just need camber adjustment, the front gotta roll still and put on a camber kit...

[J.RIVERA]

looks real good

[Jiraiya_13]

could be wrong on the disk types it might be Low disk not S.Low but it looks like S.Low to me...

[vipbitch]

Front camber kit max neg camber available is from skunk2, it replaces the upper arm with a sliding balljoint, the most you will get out of it is -3 deg on top of what your airbags will camber the cars double wishbone suspension in.

So it should fit, but your wheels will be sticking out like dogs balls when driving at ride height,

Rear camber kit set at -8.5 deg will fix your problems with the rubbing on the inner fender.

As I was running a similar set u, and found that amount of camber was just right to drive at.

But if your on air It wouldnt matter it it touches the fender as you will be on the floor, and not going anywere ;p

this is my ride, sold it now though, lol
http://img31.imageshack.us/img31/798/1000151o.jpg (http://img31.imageshack.us/i/1000151o.jpg/)

[Jiraiya_13]

Yeah just gotta order the Skunk2 one but its for the TSX but people have told me it should fit...as for the rears i got the Ingalls smart arms...looks like you were runnin on 20s or are those 19s? The fronts are sticking out more than my rears, not worried about the rears, only the fronts since the front don't camber naturally as well as the rear...

[jgul23]

wow thats a clean accord

[Jiraiya_13]

could only go -4.5 in the rears for camber adjustments I think if I went more there wouldn't be enough threads:signdammit: gonna do some rolling and pulling tomorrow, oh yeah btw the Skunk2 Pro Series camber kit for the TSX fits 03-07 accords:biggthumpup: oh yeah the front camber kit is fully lock negative and gave the front like -2.5 bummers...we'll see tomorrow if it goes well...

[Yokotas13]

cars cool
ame isnt

[Jiraiya_13]

cars cool
ame isnt
I respect your opinion...thanks

[BIGGZ]

looking sick!!! are you entering HellaFlush?

[Jiraiya_13]

Sup, well the thing is I thought I wasn't gonna make them fit right by HF4 but now I did and i'm trying to get in...

[BIGGZ]

thats cool man! Hopefully I get to see your car in person!

[Jiraiya_13]

Here just shot some pics...Yeah I know...majority of you guys are gonna hate the Yakima racks, but I like them...
http://i192.photobucket.com/albums/z222/MansuAccord/HF4%20fitment/529f9e89.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/HF4%20fitment/786bfee5.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/HF4%20fitment/ef496be4.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/HF4%20fitment/141135e9.jpg
http://i192.photobucket.com/albums/z222/MansuAccord/HF4%20fitment/9923c598.jpg

[BIGGZ]

now thats some ill fitment!!! Hella Flush approved guaranteed!

[vipbitch]

You need more slammage, without the roof racks.

[dubyGS3]

wow, that's pretty gangster.

[Jiraiya_13]

You need more slammage, without the roof racks.
Couldn't go any lower need to pull the rears and the fronts i dunno thats all she went but nothin seems to be rubbing, weird, sad to say these wheels are sold...til next time, runnin on 18s daily wheels for the time being, dunno if i can stomach all the tickets from HPD...

[ryhi]

get some inspire headlights.

[terry pham]

very nice accord.

[MaxiNone]

looks real good...

[gatostyle]

hello......Can anyone let me know how or where can i get the modulo kit for the accord like the pic on the botton of teh comments