Pics Request?

[sukoshiyoshi]

Hey guys I have a favor to ask.......I am seriously looking at the Watts System because I am thinking of going Air. Only thing is I need a picture of the rear axel of our EGGs(my digital camera decided to go for a swim). Anyone have pics of their rear exel? This pic will deterine what kind of set-up I would have to get. Thanks ahead of time!

Sukoshiyoshi

[mdenoga]

Well if I have time, I'll post some up.

[allstar]

this is the only pic i have

http://www.ibforfree.com/uploads/crucialmindz/post-40-1173164903.jpg


shrugs ;)

[sukoshiyoshi]

Allstar,

Wow that is one sweet looking set up. Did you take any step by step photos by chance? What kind of air system you going with? How did you remedy the rear axel shifting issue? Did you customize a Watts type system or are you using a lateral bar? Can you take a photo of your rear axel as well?

I am looking to get a photo of the rear axel in order to see what kind of clearance I have to put in the Watts System. The guy who maybe helping me in doing the Watts System requested photos.

Sukoshiyoshi

[sukoshiyoshi]

Disregard my request......looks like I will be just going the Lateral Rod route and hopefully if all goes well will be picking up a UAS with my TEIN Super Wagon Coil-Over Set-up. My own Air-Cobra wanna be set up. LOL

Sukoshiyoshi

[mdenoga]

*cought cought* ahem Air Runner....I guarantee you'll be satisfied with the ride quality and setup.

[sukoshiyoshi]

Air-Runner......hands down the best of the best but to do that set-up I got to donate one of my kidneys. LOL Rather keep it for when I put a down on a house. LOL

Sukoshiyoshi

[viplife]

Disregard my request......looks like I will be just going the Lateral Rod route and hopefully if all goes well will be picking up a UAS with my TEIN Super Wagon Coil-Over Set-up. My own Air-Cobra wanna be set up. LOL

Sukoshiyoshi

make sure your weds dont hit that balloon bag in the front...

also threatening ability to camber at lower strut mount.

[sukoshiyoshi]

Yeah the more facts that you point out to me the more I think that the UAS is not going to work. I recall taking pictures of the clearance (or the lack there of) with the wheel and shock......have already informed my seller that I will not be picking up the UAS system from him. I sure hope that he sells the car to a person who wants the air system.

Sukoshiyoshi

[JDMJim]

what's holding the valves to the body? Is that speaker wire run to them?? How do you know which is which at the front??? I used nine conductor and put all the grounds together so I know which wire goes to which control valve. Running wire across sharp edges prolly isn't a good idea either. But what do I know??? Took me only two years to get to where I am.

[hamads]

i see a "L" bracket off one of the valves, looks custom made but it works! nice job