Some New pic of my ES 300 / Windom

[mcv20]

My new set up with 18 x 8 Sc430 wheels.

[mcv20]

second pic

[RobSoVip]

Its a decent start. I never liked the way that the TRD skirts had the black strip... It really breaks up the continuity of the car. A different skirt and a slightly lower drop, and your car would have some presence! Also, how do the wheels fill out the fenders? Do you have a side shot to show how close they are to the edge of the fender? Those wheels would look pretty good on your ES with a slight strech and spacers pushing them just a tad beyond flush.

[RHDVIPbB]

That actually looks good.

[CharismaY33]

haha looking good you could actually pull that look off. Umm i also conquer do some spacers for the push out then it should give some appeal.

[mcv20]

Currently i m running on offset F/45, R/42(with 3 mm spacer) and the rim is 18 x 8 (with 225/40/18) too bad the tires didt strech at all :-[, do you guys think another 2 mm would make much diff in the rear cus i m looking into some 5 mm spacer for the rear ?

[carb0]

as much as ive hated those wheels- thats a good change-out for stock, goes somewhat well w/ what your doing o.0

[bBOXD]

Post some pics from the front and rear of the fenders and im sure there are members here that might be able to help you out as to how far youll need to space it out. :)

[cr00klyn718]

Looking good, some spacers on those would make it even better.

[gato]

looking good. looks meaner

I agree with the rest, drop it more, stretch the tires to a 215/40/18 ( if you just baught them you can still exchange the tires) and definitley wider.

[mcv20]

here is some new shot on from the rear

[mcv20]

and one more shot of the from the front

[carb0]

hell yeah, not bad at alllll, nice fitment for stockers too, a little more pushing would be sweet too. kinda a little step ahead w/ the flush wheels- and air dammit!!! air! sorry for the opinions... still looks good

[efini_kid]

well looks i have to get a new idea for my windom. that is exactly what i wanted mine to look like. haha. guess im goin auto couture kit now.

u should lowerd the car a couple more inches and then u should throw some 5 or 10mm spacers on the rear. that would make them flush.


great car tho man, looks very well taken care of

[mcv20]

Thanks for all the response..

actually this is my daily driven, therefore i m not looking in to coilover setup.. but i m kind of regard right now not getting the race springs in the beginning; currently i m running on Kg/mm Dr21 supersport springs, F45mm / R35mm. as for the DRacing it should lower it to F55m / R45mm... but too bad they discontinue that model already..

[mcv20]

Side..

Would u guys recommend i switch to the new STAR style center cap or keep what i have now..?

[mcv20]

like this

[TransformCelsior]

have you considered painting the bottom portion to match the car color? I think it would look tons better.

[RobSoVip]

have you considered painting the bottom portion to match the car color? I think it would look tons better.


I actually think that the two tone works on this car.

[shoez]

Would u guys recommend i switch to the new STAR style center cap or keep what i have now..?


Keep your current set up. looks better IMO

[OnTop]

the whit with champaign bottom, to me, screams high end camry. if it were black with drk silver then thats more the look. i would color match it all white

[mcv20]

actually i have seen some preal white es paint mono tone, but it wasnt look as good as mono-tone black; and it actually make it more like a CAMRY..if it is mono - tone white.