ball joints 202 chassis

[SLYDRDIE1]

anyone have problems with there lower ball joints. im only runnig like 1.5 deg camber since it is my daily. ben thru two sets of ball joints.once replaced with factory and another aftermarket. its also been to a cupl frnt end shops to have it cheked out including a socalled european specialists. wondering if anyone else has had any probs and if so what parts they used to fix it. thanks in advance there 18x9.5 frnt with 205 40 18x10.5 225 40 droped aprox 3 in
http://i130.photobucket.com/albums/p275/SLYDRDIE1/Picture035.jpg
http://i130.photobucket.com/albums/p275/SLYDRDIE1/Picture043.jpg
http://i130.photobucket.com/albums/p275/SLYDRDIE1/Picture042.jpg
http://i130.photobucket.com/albums/p275/SLYDRDIE1/Picture022.jpg

[OCKlasse]

Can't answer your question, but WOW beautiful fitment! Can you tell me your offsets front and rear? Where are your side mirrors?

[kaizer]

Nice ride!

[SLYDRDIE1]

thanks. well the offset is +25 and i had to run a spacer to get it out like i wanted.as far as the mirrors go someone hit the driverside and broke it and i got to readn about u and the 203 mirrors and thought of going that route.i like the look.hopfully going to the paint shop soon where i can repaint the thing.i also wana go @ a 1/4 inch lower in the front.i think i can get away with that while doing minimal fender work.although id rather go air runners but not since its my daily and i got to many other project cars going on :pat:

[OCKlasse]

thanks. well the offset is +25 and i had to run a spacer to get it out like i wanted.as far as the mirrors go someone hit the driverside and broke it and i got to readn about u and the 203 mirrors and thought of going that route.i like the look.hopfully going to the paint shop soon where i can repaint the thing.i also wana go @ a 1/4 inch lower in the front.i think i can get away with that while doing minimal fender work.although id rather go air runners but not since its my daily and i got to many other project cars going on :pat:

I have W210 power folding mirrors, but I have my old mirrors for sale if you need them :biggthumpup:. Juice your car like I did =)

Juice > Air

[SLYDRDIE1]

thought about juice.ive actually got a 2 pump prohopper pro series setup that cam off an astro van i had. accumulators and all.just not sure.wud have to get new cylinders cause i dont think 10's and 18's will fit a benz =) how much on the factory's u got. and if u dont mind you know since im all the way on the eastcoast what frnt bumper is that?my bad i meant 210 dont know why i had 203 on the brain

[OCKlasse]

$250 shipped for both mirrors (heated and dimming). I have a Grosser WALD kit, which is the front bumper, rear bumper, and side skirts.

[SLYDRDIE1]

thats cool. i gota put a tranny in my ae86 for a race feb 2nd so after i get done throwing money at it ill hit u up on the mirrors.

[ryhi]

my ball joints went out. replaced with aftermarket and never had a problem after that. i did have a problem with the upper control arms. both of the joints on that were shot and leaked all the grease out.

[lep-1]

Mine also went dead. Now going with aftermarket. Fine.
Lots of camber....Here is a pic.
No spacers in pic. I have now 20mm and looks much better. et35 8,5x17 front

http://i3.photobucket.com/albums/y71/Lep-1/100_0794.jpg