re:ucf10 wheel fitment

[silviapowered]

I have a 1992 ls400. I was thinking about buying 19x9 19x10 +22. will these wheels fit with minor modifications?

[antbo]

yup! you'll need to shave, roll or cut. thats on all the fenders

[PMP-LEX]

It'll work...

[chrisngo]

It'll work...


That reply does NOT help. You should elaborate on what it will take to fit these wheels under the fenders to prevent the monster truck look.

Silviapowered - I used to have a 240SX, so i understand why you would think these wheels may possibly work on the LS. The lowest offset i've seen that will work in those sizes, using a stretch and cut fenders is 19x9 and 19x10 in the upper 30 offsets. To some this may be conservative, but if you do not have the funds to do suspension work and body work, any wheels with lower offsets will look unbalanced on a VIP platformed car.

If you do have the extra time and patience to work out the fenders and suspension, then the +22's will go on with no problem.

Hope this helps!
Chris

[socalvip]

yup! you'll need to shave, roll or cut. thats on all the fenders


exactly what he said.....

[VIPete]

That reply does NOT help.* You should elaborate on what it will take to fit these wheels under the fenders to prevent the monster truck look.

Silviapowered - I used to have a 240SX, so i understand why you would think these wheels may possibly work on the LS.* The lowest offset i've seen that will work in those sizes, using a stretch and cut fenders is 19x9 and 19x10 in the upper 30 offsets.* To some this may be conservative, but if you do not have the funds to do suspension work and body work, any wheels with lower offsets will look unbalanced on a VIP platformed car.

If you do have the extra time and patience to work out the fenders and suspension, then the +22's will go on with no problem.

Hope this helps!
Chris


Exactly what he said....

Take your time, research and think it through.