nice..... can you take a pic.. of your whole wan full slam..
nice..... can you take a pic.. of your whole wan full slam..
I'm loving the new look.![]()
Tried my hand in fiberglassing speaker pods to the A pillar. Tweeter was mounted using a piece of ABS pipe & mid mounted using mdf & spare styrene.
Wrapped, resined & filled with bondo milkshake.
After extensive sanding & a coat of gray primer.
A Pillar was then flocked. I used a flocking kit from www.donjer.com
A set of DLS UP36i speakers was then installed:
![]()
Those pillars turned out dope..
Quality over quantity!!!! - Rule #1
Thanks everybody.
I have been slowly upgrading the rest of the sound system as time and budget permits.
Zapco Ref 1000.4 - midbass/center
Zapco 500M - subwoofer
Zapco 360 - midrange/tweeter/rear
JBL MS-8
Equipment is mounted on the driver’s side side panel. I wanted to keep the floor clear and this was the best place I found to mount them. The wiring work leaves a lot to be desired as far as neatness but it will do for now. I might add a fan to cool the amps but have not done so.
![]()
damn thats nice man....where pics of the #$#%#$. oh thats a secret.... lol
Hardwood floor project:
I started by making a cardboard template of the floor. Brackets for the rear seats were raised by using steel spacers and longer bolts. I added 50 sq ft of mass loaded vinyl for sound deadening and kept the stock carpet in place.
Plywood was laid on top of the carpet as the base floor for the hardwood.
Purpleheart hardwood was then installed.
![]()
HANEP!!!![]()
Good prices on detailing supplies*
http://www.detailedimage.com/wax.php...ailedimage.com
MAN LOOKS AWESOME! Had that in mind for mine but not gotten around to it. Again looks awesome
WOW ......GANDA !!!!!
Oh damn! Thats a limited edition junction produce dog!
---
I am here: http://tapatalk.com/map.php?uhxgni